Construction is strictly prohibited on rainy, snowy days and days with strong winds above level 5. The temperature of the construction environment should not be lower than 0℃. When precipitation occurs during construction, the laid roll materials should be well protected. The heating width of the construction must be uniform and consistent. The distance between the nozzle of the flame heater and the roll surface should be moderate. The heating within the width should be uniform. The roll surface should be melted to a bright black color. The roll material should not be overheated, and the surface temperature of the material should not be higher than 200℃ during hot melt construction. For exposed use, waterproof roll materials with opaque mineral granular isolation materials on the upper surface should be used. When the facade roll material is too high, anti-slip measures should be taken and the closing part should be sealed with sealing paste. The safety protection facilities at the construction site are complete, and fire-fighting equipment is placed as required. During use, the product should be welded with liquefied gas, ethanol as fuel or hot air.
Root penetration resistant
Packaging: The roll is rolled into a cylindrical shape and wrapped with suitable materials
Roll width (m): 1.0
Roll thickness (mm): 3.0, 4.0
Roll length (m): 10
Area (m²/roll): 10
Upper surface isolation material: polyethylene film (PE), fine sand (S), mineral granules (M)
Lower surface isolation material: polyethylene film (PE), fine sand (S)
*Fine sand is mineral particles with a particle size not exceeding 0.6mm.
Excellent performance
90 degrees without flow or dripping
Environmental friendly
Comply with national environmental protection requirements
Durable
The service life is more than 20 years without rotting or deterioration
Product Diversity
A variety of products and solutions are formulated according to the site.